STL file Playseat Challenge Mount for Logitech Driving Force

This model is two parts and is held together by two M6 socket head cap screws and two nuts (Bolt length minimum 40mm). I suggest installing grip tape on the flat surfaces for a secure hold. I also recommend adding one wrap of grip tape to the circumference of the tubing frame of the chair to ensure your mount doesn’t rotate when you shift into reverse. This is printed from PLA filament and only requires a 20% infill for structural integrity. This mount will not rotate or flex under shifting load. Downloadable STL files include RIGHT and LEFT handed shifter/stick mount. Please ensure you print the one for your needs. I included a shorter file for smaller capacity printers (20cm max height) which will still fit the shifter mounts.

Playseat Challenge Thrustmaster TX Wheel Supports STL digital

Playseat Challenge Shifter Mount, M6 Hardware por frez_knee

Next Level Ebrake Handbrake and logitech shifter mount by Matthew

Logitech Driving force H shifter Console to mount to Playseat

Ultra-portable Playseat Challenge X – Logitech G Edition sim

▷ playseat challenge shifter 3d models 【 STLFinder 】

Playseat Challenge Shifter Mount - 3D model by jeoje on Thangs

This model is two parts and is held together by two M6 socket head cap screws and two nuts (Bolt length minimum 40mm). I suggest installing grip tape

Playseat Challenge Mount for Logitech Driving Force Shifter G923 G920 G29 G27

PLAYSEAT Challenge - Black (EU) : : Toys & Games

This is my mount for a Logitech driving force shifter on a Playseat Challenge. It mounts everything far away from the opening mechanism (mounted on

Shifter+Ebrake Mount for Playseat Challenge

3D Printed Playseat Challenge Bracing : r/simracing